Buyers plan in containers, not in pieces. Pick a container, enter the carton size and quantity of each product, and see how many cartons fit, how the load is stacked and how much space is left. Products with the same sequence number are mixed to fill the container as full as possible; a product with an empty quantity fills whatever remains. Use the sample cartons to get a feel for it, then replace them with your own.
The plan is a straight geometric fit on the usable inside dimensions of each container (slightly under the ISO nominal size), with no pallets or dunnage. It is a good first estimate for an inquiry, not a final loading plan.
How many baskets fit in one container?
Pick a container, then enter your carton sizes and quantities. Cartons are stacked from the back wall to the doors.
Container settings
Usable dimensions are a little under the nominal ISO size, to allow for wall corrugation and carton bulge; edit them to match your forwarder. Payload is the ISO maximum; road limits at the destination are often lower (around 19–20 t for a 40′ in the US).
Leave Quantity empty on the last product and it fills the remaining space.
| Product | Carton | Cartons | Pieces | m³ | kg | Stack L × W × H |
|---|
Indicative: a straight geometric fit with no pallets, dunnage or gaps. Treat it as an estimate; the count on loading day can differ.
How many cartons fit in a 40′ container?
It depends almost entirely on the carton. A 40′ high-cube has about 74 m³ of usable space, and woven baskets rarely come close to the weight limit, so volume is what fills first. The calculator comes with three sample cartons. Carton A (45 × 32 × 66 cm) stacks four high in a 40′ HC and loads at 760 cartons, all upright. Carton B (44 × 44 × 55 cm) also stacks four high but leaves almost half a metre empty under the roof: 540 cartons upright, or 680 if some can lie on their side. Multiply the cartons by the pieces in each and you have the container quantity. Enter your own carton size above for a figure you can use.
| Sample carton | 20′ GP | 40′ GP | 40′ HC |
|---|---|---|---|
| Carton A, 45 × 32 × 66 cm | 279 / 330 | 570 / 674 | 760 / 763 |
| Carton B, 44 × 44 × 55 cm | 260 / 285 | 540 / 587 | 540 / 680 |
| Carton C, 55 × 36 × 42 cm | 320 / 376 | 660 / 780 | 792 / 865 |
Which container should I book?
For an order of mixed home-décor baskets, a 20′ container is a sensible first order (roughly 32 m³ usable), a 40′ GP holds about twice that, and a 40′ HC adds 30 cm of height, usually for little or no extra freight. The extra height only helps if your cartons can use it: upright, carton B loads 540 cartons in a 40′ GP and the same 540 in a 40′ HC. If your quantities fall between two sizes, the calculator shows how much of the container is left and how many more cartons it would take to fill it.
Why the count is lower than the nominal volume suggests
Cartons are rigid boxes stacked inside a slightly corrugated steel box. A few centimetres are lost to the walls, a layer may not reach the ceiling, and the last slice of the container may be narrower than one carton. How much of the volume you use depends on how the carton divides into the container: the three sample cartons above use between 77% and 98%. The calculator reports the free length at the doors and the free height above the load, so you can see where the rest of the space is.

